Information
Classic round bun foot at 85mm diameter suitable for lounge suite chairs and sofas. Timber is tight grained European Beech and available in Mahogany Polish, Natural Gloss or Raw Unfinished. Height is 43mm including the 3mm x 18mm chrome plated dome on the base. Fitting is by threaded bolt already inserted through the centre of the wooden foot for greater strength. The thread diameter of the bolt is Metric 8mm (m8) and is 30mm long. An m8 Insert Scew ris supplied with each leg supplied. This is the strongest fitting available for New Zealand soft timber frames. The drill size for the wooden frame to fit these 8mm Insert Screws is 10mm and the hole should be at least 32mm deep to permit clearance of the threaded bolt inside the frame. The Insert Screw is wound into the prepared hole by use of an 8mm diameter Allen Key or a 5mm Flat Bladed screwdriver will suffice. The threaded bolt should then be easily wound into the fitted Insert Nut for a secure and stable result.
Thread Size
Genuine European Beech timber
Attractive tight grain of the Beech timber is hard-wearing
Threaded bolt inserted the fulll length of the leg for strength
Heavy duty m8 threaded bolt with 30mm extended length for strong fitting
Protective plastic sleeve over threaded bolt
Individually wrapped
Packaging
Each leg has the m8 (metric 8mm) threaded bolt factory fitted. Each threaded bolt is shrouded in a plastic sleeve to help prevent damage to other legs in transit. Each wooden leg is individually wrapped in bubble wrap to help prevent damage during transit. M8 Insert Nuts for fitting to the wooden underside of chair or sofa frame are packed separately in a polybag inside the carton. Check for these before throwing out the packaging. All legs are supplied inside strong cardboard packaging.
