Information

The Bed Centre Rail Connector is designed for timber framed beds.  A centre rail set consists of four (4) pieces.  An angle bracket goes up against timber/MDF head rails or a tail rails - one at each end.  A metal plate with lugs goes up against the end of the timber centre rail - one at each end.. These are then slid together to lock them into place.  The lugs on the plate are angled so that any weight loading presses downwards and forces the bracket to tighten. If measured and fitted correctly the centre rail will not move once locked into place.  Screws are not provided as each job is different and gauge and length will depend on the timber used in the bed frame and centre rail. There are three screw holes in the angle bracket and four screw holes in the lugged plate.  See under the Specifications tab for dimensions.